先前媒體報導 Intel 承諾在 5 月底前,發布一份關於 Core i9 13900K / 14900K 穩定性問題的聲明,但直到現在仍沒有正式聲明報告。不過,Intel 似乎承認問題不只是主機板設定造成的,微碼演算法的錯誤也是其中之一。
Intel 將透過微碼更新解決 14900K 穩定問題
據 Igor'sLAB 揭露的 Intel 內部文件顯示,該公司對 Raptor Lake-S (第 13 代 Core) 和 Raptor Lake Refresh S (第 14 代 Core) 進行檢測,發現造成穩定性問題的根本原因在於 eTVB (Enhanced Thermal Velocity Boost) 微碼演算法中設定的值。
Root cause is an incorrect value in a microcode algorithm associated with the eTVB feature.
Implication Increased frequency and corresponding voltage at high temperature may reduce processor reliability.
Observed Found internally. Impacted platforms Raptor Lake S, Raptor Lake Refresh S (CPUID 0xB0671)— Intel NDA documents obtained by Igor’sLAB
Failure Analysis (FA) of 13th and 14th Generation K SKU processors indicates a shift in minimum operating voltage on affected processors resulting from cumulative exposure to elevated core voltages. Intel analysis has determined a confirmed contributing factor for this issue is elevated voltage input to the processor due to previous BIOS settings which allow the processor to operate at turbo frequencies and voltages even while the processor is at a high temperature. Previous generations of Intel K SKU processors were less sensitive to these type of settings due to lower default operating voltage and frequency.
Intel requests all customers to update BIOS to microcode 0x125 or later by 7/19/2024.
This microcode includes an eTVB fix for an issue which may allow the processor to enter a higher performance state even when the processor temperature has exceeded eTVB thresholds.— Intel NDA documents obtained by Igor’sLAB
GPT-4o 翻譯如下:
根本原因是與 eTVB 功能相關的微碼算法中的數值不正確。
影響:高溫下增加的頻率和相應的電壓可能會降低處理器的可靠性。
觀察:在內部發現。
受影響的平台:Raptor Lake S, Raptor Lake Refresh S (CPUID 0xB0671)— 來自 Igor'sLAB 獲取的 Intel 保密協議文件
13 代和 14 代 K 系列處理器的故障分析 (FA) 表明,受影響的處理器在累積暴露於高核心電壓後,最低工作電壓有所變化。Intel 分析確定,此問題的確認原因之一是由於先前的 BIOS 設定允許處理器在高溫下,仍以渦輪頻率和電壓運行,從而導致處理器輸入電壓升高。先前幾代的 Intel K 系列處理器對這些設定的敏感度較低,因為它們的預設工作電壓和頻率較低。
Intel 要求所有客戶在 2024 年 7 月 19 日之前,將 BIOS 更新到微碼 0x125 或更高版本。
此微碼包含 eTVB 修正,可解決處理器在溫度超過 eTVB 閾值時,仍可能進入更高性能狀態的問題。— 來自 Igor'sLAB 獲取的 Intel 保密協議文件
VideoCardz 指出,Thermal Velocity Boost 技術僅適用於 Core i9 型號。因此,微碼內的問題僅影響這些處理器。該技術旨在根據可用的熱容量和功耗對處理器進行超頻,超越渦輪加速技術。據推測,該演算法未按預期工作,導致許多 Core i9 型號出現穩定性問題。
Intel 對 Thermal Velocity Boost 的解釋:
Intel Thermal Velocity Boost (Intel TVB) 於 2018 年推出,是一項可在散熱預留空間和渦輪功率預算可用時釋放額外 CPU 效能的技術。
Intel Thermal Velocity Boost (Intel TVB) 是一項功能,可根據處理器運作時低於其最高溫度的程度,以及是否符合渦輪加速預算,而在適當時機自動增加頻率頻率,以超過單核與多核的 Intel 渦輪加速技術頻率。頻率的增益和持續時間取決於工作負載、處理器的能力以及處理器的冷卻解決方案。
Intel 現在要求 OEM 和合作夥伴,要在 7/19 之前發布包含新微碼的 BIOS 更新。在目前的 LGA1700 主機板上新增 Intel Default 設定檔之後,可能很快就會看到一波 BIOS 更新,因為之前的 BIOS 並沒有解決這個問題,但是隨著新微碼更新,穩定性問題可能最終得到解決。
VideoCardz 稱目前還不清楚 Intel 為何仍未發表聲明,假如 Igor Walllossek 洩漏的這些保密內容是真實的,那麼該公司應該很快就能確認其真實性。
筆者認為就算 Intel 後續沒有聲明,但只要板廠接下來有提供新的微碼更新 BIOS,還是可以證實這些內容並非憑空杜撰,只希望微碼更新後能真正解決問題。不過這些處置可能只適用於尚未出現穩定性問題的 CPU,如果 BIOS 更新完還是一樣,最好送修換一顆。
有趣的是,Intel 透過 Tom's Hardware 表示,他們尚未確定根本原因,因此案情依舊撲朔迷離,一切還有待 Intel 做出最後聲明。
"Contrary to recent media reports, Intel has not confirmed root cause and is continuing, with its partners, to investigate user reports regarding instability issues on unlocked Intel Core 13th and 14th generation (K/KF/KS) desktop processors," Intel said in a statement sent to Tom's Hardware. "The microcode patch referenced in press reports fixes an eTVB bug discovered by Intel while investigating the instability reports. While this issue is potentially contributing to instability, it is not the root cause.”
“與近期媒體報導相反,Intel 尚未確認根本原因,並正與其合作夥伴繼續調查用戶對解鎖的第 13 代和第 14 代(K / KF / KS)桌面處理器不穩定問題的報告,” Intel 在發給 Tom's Hardware 的聲明中表示。
“媒體報導中提到的微碼更新修復了 Intel 在調查不穩定報告時發現的一個 eTVB 錯誤。雖然此問題可能對不穩定性有影響,但它不是根本原因。”
延伸閱讀